Lubricants

 pdf download Dimension Details

pdf download  Capacity Details

Approved Lubricants for Bevel Helical Gearbox

Oil Capacities

AGNEE gear units are supplied without oil. Before operating it is essential to ensure that they are filled to correct oil levels, as indicated by markings on dipsticks, with lubricants recommended by AGNEE. Overfilling can cause overheating and leakage.

Correct lubricant is most important and it should be noted that EP oils are recommended in all instances.
Lubricants listed are suitable for normal ambient temperatures and operating duties. All gear units in this range are designed to operate under full load at a maximum temperatures of 110 degree C. Higher temperatures up to a maximum of 120 degree C are acceptable on the basis of peak periods of short duration only. In certain applications these maximum temperatures may be exceeded by the use of special lubricants. Such cases, or others where extreme conditions are to be met, e.g. low temperature operation or unusual loading conditions, should be referred, with full details, to AGNEE for recommendations.

Recommended lubricants are based on information provided by oil supplied and responsibility cannot be accepted for the quality or suitability of oil supplied, nor to any mechanical defect resulting from unsatisfactory lubrication due to the use of sub-standard oil.
RECOMMENDED LUBRICANT
ISO VG320
Bharat Petroleum Cabol 320 or Amocam 320
Castrol Alpha ZN320
Gulf Harmony 320
Hindustan Petroleum Enklo 320
Indian Oil Servomesh SP320 or Servosystem 320
VeedOI Avalon 320
Esso Petroleum Co. Ltd. Sparton EP320
Shell Group Omala Oil 320

Oil Capacities for horizontal Units in litres (approx.)

Unit type Unit Size
140 160 180 200 225 250 280 315 355 400 450 500 560 630 710
H1 6 9 13 18 25 35 45 70 95 130 180 245 – – –
H2 7 11 15 20 27 35 50 70 100 140 205 320 425 425 895
H2S – – – 19 25 32 45 55 90 125 175 230 290 290 655
H2SF 7 11 15 20 27 35 50 70 100 140 205 320 425 425 895
H3 9 13 17 20 27 35 50 70 100 140 205 415 550 550 1150
H3S – – – 19 25 32 45 55 90 125 175 315 405 405 870
H3SF 9 13 17 20 27 35 50 70 100 140 205 415 550 550 1150
H4 9 13 17 * * * * * * * * – – – –
H4SF 9 13 17 * * * * * * * * – – – –
B2 6 9 13 18 25 35 45 70 95 130 180 275 – – –
B2S – – – 17 22 30 40 50 80 115 165 190 – – –
B2SF 6 9 13 18 25 35 45 70 95 130 180 275 – – –
B3 7 11 15 20 27 35 50 70 100 140 205 410 535 800 1095
B3S – – – 19 25 32 45 55 90 125 175 315 405 575 835
B3SF 7 11 15 20 27 35 50 70 100 140 205 410 535 800 1095
B4 9 13 17 * * * * * * * * – – – –
B4SF 9 13 17 * * * * * * * * – – – –
As improvements in design are continually being made, this specification is not to be regarded as binding in detail and dimensions are subject to alteration without notice.